CircuiTree of Lights

Three years ago I posted about a little Tree of Lights that consisted of conductive paint and auto-changing RGB LEDs. Over the years I had to mend some of the connections with wire glue. But, again, this year, I found that most of the connections, all but one actually, had broken. The LED legs had physically broken the traces by pulling away from the tree-form.

So I gave in and soldered silicon wire between all the connections. As wire has much lower resistance I needed to add resistors as well. I also added proper wire connectors for ease of adding power, and added so much hot glue to try and hide the wires in the pre-existing paint traces. The main benefit of the wires is that now the whole thing runs happily off 3Vs, whereas before I was struggling to get half-decent brightness with 9Vs.

( Photos )